+971 562181534 info@marinocart.com
Welcome to Marino Cart! Get the best marine spare parts at unbeatable prices. Fast shipping worldwide!
Shopping Cart
$0.00
No products in the cart.

Raymarine, Pathfinder 22 CAT 2 Commercial Radar System with 22″ Display

Categories , Tags , Brand:

The Raymarine Pathfinder 22 Commercial Radar System (Pack T70593) is an IMO type-approved CAT 2 SOLAS X-band navigation system engineered for vessels between 500 GT and 10,000 GT. At its core, the system replaces traditional high-maintenance magnetrons with a cutting-edge 110W solid-state transmitter featuring CHIRP pulse compression. This advanced configuration matches or exceeds the target detection performance of traditional 12kW units, while delivering razor-sharp target separation down to a maximum range of 96 nautical miles with zero warm-up time.

The bridge interface centers around the E70663-IMO 22-inch display, which features a high-brightness 1,275-nit screen with a protective HydroTough™ hydrophobic nano-coating to ensure superior daylight visibility and resist water, salt, and oil contamination. Navigators benefit from professional-grade situational awareness tools, including an advanced tracking processor capable of managing up to 100 ARPA targets and a massive 4,000 active AIS targets simultaneously. The system also supports high-speed dynamic tracking with variable antenna rotation speeds up to 60 RPM, ensuring real-time position updates during high-speed maneuvers or complex traffic situations.

System connectivity is anchored by the A80792 Data Collection Unit (DCU), which provides robust, isolated interfacing for essential shipboard sensors such as the Master Gyrocompass, Speed Log, GPS, and AIS. The DCU features 8 opto-isolated inputs and 6 ISO-Drive outputs to prevent electrical interference and ground-loops, alongside three Power-over-Ethernet (PoE) RayNet Gigabit ports that comply with international IEC 61162-450 network standards. For critical safety monitoring, the unit also includes a dedicated hardware alarm relay that instantly interfaces with the vessel’s central bridge alert system in the event of target threats or sensor faults.

Technical Specification

Component / Function Parameter Detailed Engineering Specification
System Classification IMO Category / Compliance CAT 2 SOLAS / IEC 62388 & IEC 62288
Vessel Coverage Limits Commercial & Superyacht platforms up to 10,000 GT
Marine Certifications Marine Equipment Directive (MED Wheelmark), USCG, FCC
Antenna Assembly Type & Waveguide Profile 6-Foot Slotted Array Antenna (Horizontal Polarization)
Beam Separation Dimensions Horizontal: 1.32° / Vertical: 25°
Mechanical Drive Low-maintenance fan-less design
Wind Load Capacity Up to 100 Knots operational rating
Antenna Weight 12 kg (26.4 lbs)
Transceiver Drive Unit Transmitter Technology Solid-State with CHIRP Pulse Compression
(E70621 Pedestal) Peak Power Equivalence 110 Watts (Exceeds raw target return performance of 12kW magnetrons)
Operating Frequencies Tri-band switching: 9370 MHz, 9400 MHz, 9430 MHz
Maximum Tracking Scale 96 Nautical Miles (NM)
Dynamic Rotation Speeds 12 / 24 / 36 / 48 / 60 RPM
Receiver Performance Linear characteristics with noise thresholds < 5 dB
Pedestal Housing Specs 388 x 360 x 335 mm / 16 kg (35.2 lbs) / IPX6 Waterproofing
22″ Marine Monitor Model Number E70663-IMO
(Display Unit) Display Active Area Size 21.5-inch active-matrix TFT display (16:9 Aspect Ratio)
Native Pixel Resolution 1920 x 1080 Pixels (Full High Definition)
Backlight Illumination High-intensity 1,275 nits (Fully daylight/sunlight viewable)
Environmental Protection HydroTough™ oil/salt/water repelling nano-coating; IPX6 / IPX7 front face
Physical Form Dimensions 326.33 x 533.56 x 180.75 mm / 9.9 kg (21.8 lbs)
Tracking / Software ARPA Acquisition Limits Up to 100 targets simultaneously (Auto-acquisition zones or Manual pick)
AIS Tracking Boundaries 4,000 active targets rendered on monitor / 6,000 processed in buffer
Stabilization / Orientation Sea & Ground Stabilization / Head-Up, Stabilized Head-Up, Course-Up, North-Up
Vector, Trail & History Configurable steps: Off, or graduated 1 to 30 Minutes
Data Collection (DCU) NMEA Serial Inputs 8 x Opto-isolated NMEA 0183 (IEC 61162-1) ports
(A80792 Box) NMEA Serial Outputs 6 x ISO-Drive™ isolated NMEA 0183 (IEC 61162-1) ports
Ethernet Port Config 3 x PoE RayNet ports (10/100/1000 Mbits/s), IEC-61162-450 enabled
System Alert Interface 1 x Alarm Relay (N/O, N/C contacts) tied to System Fail / Target Alerts
DCU Housing Specs 25-meter system link cable / IP40 Rated / Operational range -25°C to +70°C
Power Specifications Voltage Inputs 24V DC baseline (via VCM100 module) / 110V–230V AC via Power Kit
Power Consumption Rates 95 Watts (Typical Draw) / 30 Watts (Standby) / 195 Watts (Maximum Peak)

There are no reviews yet.

Be the first to review “Raymarine, Pathfinder 22 CAT 2 Commercial Radar System with 22″ Display”

Your email address will not be published. Required fields are marked *

Related Products