No products in the cart.
$110.00Earn 110 points!
1 in stock
Q‑power S‑360‑24 switching power supply delivers a stable 24 V DC output at up to 15 A (360 W), making it ideal for LED arrays, CCTV systems, industrial electronics, and more. It supports universal AC input (selectable 110 V / 220 V) to suit different mains voltages. Its protection features include overload, overvoltage, short circuit, and over‑temperature protections, with automatic recovery modes to keep your load safe. Built‑in temperature‑controlled cooling with fan ensures efficient heat dissipation under full load, while a metal chassis and ventilation slots add durability and ventilation. With line regulation and load regulation typically better than ±0.5 %, low ripple noise, and full‑load testing, this unit ensures clean, stable power. Compact and rugged, this supply measures approximately 215 × 115 × 50 mm, weighs ~ 1 kg, and features mounting holes for fixed installation. Comes with screw‑terminal connectors for input (L, N, Earth) and output ( +V / –V ), plus a small potentiometer for fine output voltage adjustment within ±10 %. This Q‑power S‑360‑24 power supply is a reliable, high‑performance choice for your DC power need.
| Parameter | Specification |
|---|---|
| Model | S‑360‑24 (S‑360 series) |
| Output Voltage (nominal) | 24 V DC |
| Maximum Output Current | 15 A |
| Maximum Output Power | 360 W |
| Ripple & Noise | 150 mV p-p |
| Voltage Adjustment Range | –16 % to +10 % (i.e. approx. 20.16 V to 26.4 V) |
| Voltage Tolerance | ±1 % |
| Line Regulation | Not always explicitly specified in sources |
| Load Regulation | Not always explicitly specified; likely within ±1 % or similar for this class |
| Setup / Rise / Hold-up Times | 200 ms / 50 ms / 20 ms (at full load) |
| Efficiency | ~ 82 % typical |
| Inrush Current (Cold Start) | 50 A @ 115 VAC & 115 V mode, and similarly at 230 V mode (some sources) |
| Input / Leakage Current | < 3.5 mA at 240 VAC |
| AC Input Current | 6.5 A @ 115 V, 4 A @ 230 V in typical configuration |
| Parameter | Specification |
|---|---|
| Input Voltage Range | 90‑132 VAC or 180‑264 VAC (switch selectable) |
| Frequency Range | 47‑63 Hz |
| DC Input Capability | Some versions accept 254‑370 VDC (when AC mode) |
| Protection / Feature | Behavior / Spec |
|---|---|
| Overload Protection | 105 % to 135 % of rated load — foldback / automatic recovery once fault is removed |
| Overvoltage Protection | 115 % to 135 % of nominal voltage — hiccup mode, auto‑recovery |
| Over‑temperature Protection | For 24 V / higher voltage units, fan ON threshold ≈ 70 °C, shutdown above ~85 °C |
| Fan Control | Built‑in temperature‑controlled cooling fan (ON/OFF based on internal temperature thresholds) |
| Parameter | Specification |
|---|---|
| Operating Temperature | –10 °C to +50 °C (some sources) |
| Storage Temperature | –20 °C to +85 °C |
| Operating Humidity | 20 % to 90 % RH (non‑condensing) |
| Vibration | 10‑500 Hz, 2 G, 10 min / cycle, over 60 min each in X, Y, Z axes |
| Withstand / Isolation Voltages | Input‑Output: 1.5 kVAC, Input‑FG: 1.5 kVAC, Output‑FG: 0.5 kVAC |
| Isolation Resistance | ≥ 100 MΩ @ 500 VDC (I/P‑O/P, I/P‑FG, O/P‑FG) |
| Dimensions (L × W × H) | 215 × 115 × 50 mm |
| Weight | ~ 1.0 kg |
| Safety / EMC Standard References | Designs refer to UL1950, EN55022, EN55024, EN61000 (in some datasheets) |
There are no reviews yet.