No products in the cart.
The NautoPilot 5000NX from Anschütz is a high-precision autopilot that provides maximum safety and fuel-saving features to reduce emissions and cost. Designed specifically for ships 100 meters or longer, the NautoPilot 5000 NX is the ideal solution for precise steering and optimal fuel efficiency.
This autopilot continues the series of Anschütz autopilots and uses unique algorithms for precise steering performance, combined with the widest range of fuel-saving features.
The NautoPilot 5000 NX provides high precision in all modes, thanks to its proven steering algorithms that are recognized for their precise steering performance and reliability.
Crews can rely on intuitive operation and full fingertip control, even in dangerous situations. This autopilot offers a long-term secure investment, as it strictly follows current and future standards.
| Parameter | Operator Unit (5.7″ Touch DDU) | Autopilot Interface Enclosure |
| Supply Voltage | $24\text{V DC}$ ($18\text{V DC}$ to $36\text{V DC}$ main & backup inputs) | $24\text{V DC}$ ($18\text{V DC}$ to $36\text{V DC}$) |
| Power Consumption | Approx. $25\text{W}$ max | Dependent on solenoid loads (drive output dependant) |
| User Interface | High-resolution color touchscreen panel with dedicated physical turn-and-push rotary controller and primary hard keys | Main processing and integration unit |
| Interface Category | Specifications & Supported Formats |
| Ethernet Network (NX Platform) | IEC 61162-450 Light Weight Ethernet (LWE) for bridge integration (Synapsis / ECDIS NX) |
| Serial Inputs (NMEA / IEC 61162) |
• Heading Inputs: Gyrocompass, Satellite Compass, Magnetic Compass (
• Speed Inputs: Speed Over Ground (SOG) & Speed Through Water (STW) (
• Position Inputs: GNSS receiver interface |
| System Bus | Dual CAN bus interface for NautoSteer AS integration / redundant operator panels |
| Steering Outputs |
• Analogue Outputs: 2x Proportional ($\pm 10\text{V DC}$, max 5mA)
• Switching Outputs: 2x Solenoid drive outputs ($24\text{V DC}$ to $110\text{V DC}$, max 48W) |
| Alarm & Status I/O | Central Alert Management (CAM) / BAM support, Off-Heading, Heading Monitor, Steering Failure, System Failure, Autopilot Active Status |
| Feature | Technical Description |
| ECOnomy Mode (Adaptive Steering) | Filters out symmetrical yawing movements and high-frequency wave-induced motion, reducing unnecessary rudder activity to yield up to 2.5% fuel savings. |
| Course Control Mode | Steers on Course Over Ground (COG) to automatically compensate for leeway, wind, and current drift. |
| Track Control Mode | Category C Track Control System (TCS) approved when interfaced with Anschütz ECDIS NX. |
| Toe Angle Optimization | Dynamic angle offset configuration for dual-rudder vessels to maximize hydro-dynamic energy efficiency. |
| Low-Speed Precision | High-precision control algorithms designed for tight maneuverability in archipelagos and shallow channels. |
| Parameter | Operator Unit | Autopilot Interface Unit | Feedback Unit |
| Weight | Approx. $3.0\text{ kg}$ | — | Approx. $4.0\text{ kg}$ |
| Enclosure Rating | IP23 (Rear) / IP56 (Front Panel) | IP12 | Heavy-Duty Waterproof (IP66/67) |
| Operating Temp | $-25^\circ\text{C}$ to $+55^\circ\text{C}$ | $-15^\circ\text{C}$ to $+55^\circ\text{C}$ | $-25^\circ\text{C}$ to $+55^\circ\text{C}$ |
| Storage Temp | $-40^\circ\text{C}$ to $+70^\circ\text{C}$ | $-40^\circ\text{C}$ to $+70^\circ\text{C}$ | $-40^\circ\text{C}$ to $+70^\circ\text{C}$ |
Manufacturer: Anschütz GmbH (Kiel, Germany)
Type Approval: MED / Wheelmark Approved (DNV Notified Body)
Applied Standards:
Heading Control Systems (HCS): ISO 11674, ISO 16329
Track Control Systems (TCS): IEC 62065
Ethernet Standard: IEC 61162-450
General Standards: IEC 60945, IMO Res. A.342(IX), MSC.64(67) Annex 3, MSC.302(87) BAM
There are no reviews yet.