No products in the cart.
The AMI X910 is a Synchro-to-NMEA 0183 converter designed to convert AC synchro transmission signals from marine navigation equipment into digital NMEA 0183 data. It can be used to interface gyrocompasses, rudder angle sensors, wind systems, speed logs, telegraphs and pitch/propeller systems with modern equipment such as radar, ECDIS, VDR and heading displays.
| Parameter | Technical Specification |
|---|---|
| Manufacturer / Make | AMI Marine |
| Model | X910 |
| Equipment Type | Synchro to NMEA Interface |
| Main Function | Converts AC Synchro signals to NMEA 0183 data |
| Input Type | AC Synchro transmission |
| Synchro Reference Voltage | Selectable, up to 220 V AC |
| Synchro Phase Voltage | Selectable, up to 90 V AC |
| Default Reference Voltage | 115 V AC |
| Default Phase Voltage | 90 V AC |
| Synchro Frequency | 40–550 Hz |
| Supported Ratios | 1:1, 90:1 and rudder sensor ratios such as 4:1; other ratios available with alignment pad |
| Conversion Resolution | 12-bit |
| Angular Resolution | 0.1° |
| Conversion Rate | Up to 40 conversions/second |
| NMEA Output | NMEA 0183 / IEC 61162 |
| NMEA Baud Rate | 4800 baud |
| Heading Output | $HEHDT, $HEROT, $HCHCC, $HCHDM |
| Rudder Output | $ERRSA |
| Wind Output | $WIMWV |
| General Transducer Output | $ERXDR |
| Data Passthrough | Yes |
| Output Selection | DIP-switch selectable |
| Input Voltage Selection | DIP-switch selectable |
| Status Indication | LED indication for valid input/function |
| Applications | Gyro, radar, ECDIS, VDR, heading display, rudder angle, wind, log speed, telegraph and pitch |
| Certification | IEC 60945 |
| Dimensions | 144 × 222 × 55 mm |
| Weight | Approx. 850 g |
| Mounting | Indoor / bulkhead mounting |
| Origin Country | United Kingdom |
There are no reviews yet.