Anschütz NautoPilot 5000 is the latest autopilot series which has been specially designed for all ships of 100 m length and above. Autopilot systems developed and manufactured by Raytheon Anschütz are based on proven steering algorithms that have been well known by seafarers for outstanding steering performance and reliability for decades.

The Anschütz nautopilot 5000 provides heading control, and course control and is part of a track control system. It combines best steering performance with lowest rudder activity for less fuel consumption. In addition, it allows an intuitive operation and provides a perfect feedback about the steering performance.

Features

Precise steering thanks to unique Anschütz steering algorithms
Ease of use and intuitive handling
Fuel-saving thanks to weather adaptivity
Simple adjustment of autopilots parameters by use of heading and rudder plotter
Cross acceleration monitor for identification of dangerous situations
Course control mode for automatic drift compensation
Approved as part of a track control system in combination with several ECDIS
Approved for high speed crafts

Technical Specification

1. Electrical & Power Specifications

Parameter	Operator Unit (Display & Control)	Autopilot Interface Enclosure
Supply Voltage	$24\text{V DC}$ ( $18\text{V DC}$ to $36\text{V DC}$ range)	$24\text{V DC}$ ( $18\text{V DC}$ to $36\text{V DC}$ )
Power Consumption	Approx. $25\text{W}$	System & solenoid load dependent
Display Panel	5.7″ Color Graphical Touchscreen with dedicated turn-and-push rotary heading controller and physical hard keys	Central processing & I/O termination hub

2. NautoPilot 5000 Model Variants Matrix

Variant Model	Heading Control (HCS)	Course Control (COG)	Track Control (TCS)	High-Speed Craft (HSC)	Precision Track
NP 5100	Yes	Yes	—	—	—
NP 5200	Yes	Yes	—	Yes (Approved)	—
NP 5300	Yes	Yes	Category B & C	—	Standard
NP 5400	Yes	Yes	Category B & C	—	High Precision
NP 5500	Yes	Yes	Category B & C	Yes (Approved)	High Precision

3. Signal Inputs & Interface Protocols

Interface Category	Input Formats & Sentences
Gyro / Satellite Compass	Anschütz Course Bus or NMEA 0183 (`$HEHDT`, `$HETHS`, `$GPHDT`, `$GPTHS`)
Magnetic Compass / Fluxgate	Course Bus / NMEA 0183 (`$HCHDT`, `$HCHDM`, `$HCHDG`, `$HCTHS`) or Magnetic Sonde `108-010`
Speed Log (SOG / STW)	NMEA 0183 (`$xxVTG`, `$xxVHW`, `$xxVBW`) or 200 pulses/NM log input
Position / GPS	NMEA 0183 (`$GPGLL`, `$GPGGA`, `$GPRMC`)
ECDIS Integration	IEC 62065 Track Control interface / NMEA `$APB` waypoint steering
System Bus	Dual CAN bus interface for NautoSteer AS bridge steering networks

4. Steering Drive Outputs & Alarms

Analogue Control Outputs: 2x proportional outputs ( $\pm 10\text{V DC}$ , max 5mA, or $4\text{--}20\text{ mA}$ ).
Switching Solenoid Outputs: 2x switching drive channels ( $24\text{V DC}$ to $110\text{V DC}$ , max 48W).
Alarm / Status Contacts: Off-Heading, Heading Monitor, Steering Failure, System Failure, Central Alarm Management (CAM/BAM) reset, Autopilot Active.

5. Environmental & Physical Specifications

Component	Dimensions / Weight	Enclosure Rating	Temperature Operating Range
NP 5000 Operator Unit	Approx. $1.5\text{ kg}$	IP56 (Front Panel) / IP23 (Rear)	$-25^\circ\text{C}$ to $+55^\circ\text{C}$
Autopilot Interface AS	Approx. $3.0\text{ kg}$	IP12	$-15^\circ\text{C}$ to $+55^\circ\text{C}$
Rudder Feedback Unit	Approx. $4.0\text{ kg}$	IP66 / Heavy Duty	$-25^\circ\text{C}$ to $+55^\circ\text{C}$

6. Regulatory Standards & Certifications

Manufacturer: Anschütz GmbH (formerly Raytheon Anschütz, Kiel, Germany)
Type Approvals: Wheelmark / MED Module B & D (DNV Approved)
Standards Compliance: ISO 11674, ISO 16329, IEC 62065 (Track Control Cat B/C), IEC 60945, IEC 61162-1/-2, IMO Res. A.342(IX), MSC.64(67) Annex 3, MSC.302(87) BAM.