+971 562181534 info@marinocart.com
Welcome to Marino Cart! Get the best marine spare parts at unbeatable prices. Fast shipping worldwide!
Shopping Cart
$0.00
No products in the cart.

Raymarine,VCM100 – Voltage Converter Module

$180.00Earn 180 points!

1 in stock

The Raymarine VCM100 (Voltage Converter Module), also identified by part number E52091, is a critical component in specific Raymarine marine radar systems, particularly the HD Digital and Magnum Open Array radars. Its primary purpose is to convert the vessel’s 12V or 24V DC power supply to the higher voltage (typically 48V DC) required to operate the radar pedestal and scanner.

Technical Specification

General:

  • Product Type: Voltage Converter Module
  • Part Number (Raymarine P/N): E52091
  • Purpose: Converts vessel’s DC power to a higher voltage required for compatible Raymarine Open Array Radar systems.

Electrical Specifications:

  • Input Voltage Range (Nominal): 12V DC or 24V DC
  • Input Voltage Range (Operating): 10.2V DC to 31.2V DC (This wide range accommodates fluctuations in a vessel’s electrical system, supporting both 12V and 24V nominal systems).
  • Output Voltage: Typically 42V DC to 48V DC (This is the stepped-up voltage supplied to the radar pedestal. Specific output can vary slightly based on input voltage and radar model, but it’s generally around 48V DC).
  • Power Consumption (Typical): The VCM100’s power consumption is usually stated in relation to the radar it powers. For example, a 4kW Magnum radar might draw:
    • Transmit: < 70 W
    • Standby: < 30 W
    • Sleep: < 1.2 W (Note: These figures are for the radar system including the VCM100, not the VCM100’s consumption in isolation. The VCM100 itself has a small power draw for its internal circuitry and efficiency losses during conversion.)
  • Protection: Designed with internal protection against over-voltage, short circuits, and possibly reverse polarity, though external fusing/circuit breaking close to the power source is always recommended by Raymarine.
  • Emergency Stop Feature: Supports an emergency stop function where a closed circuit can switch off the 48V DC supply to the radar pedestal.

Compatibility:

  • Raymarine Radar Systems: Essential and required for:
    • Raymarine HD Digital Open Array Radars (e.g., 4kW, 12kW, 25kW models)
    • Raymarine Magnum Open Array Radars (e.g., 4kW, 12kW models)
    • Raymarine Cyclone Open Array Radars
  • MFD Compatibility: Connects to radar systems that are compatible with Raymarine Multifunction Displays (MFDs) running LightHouse software, including:
    • Axiom, Axiom Pro, Axiom XL, Axiom 2 XL, Axiom 2 Pro
  • Physical & Environmental:

    • Dimensions (Approximate Package/Shipping):
      • Length: 12.25 inches (approx. 31.1 cm)
      • Width: 8 inches (approx. 20.3 cm)
      • Height: 4.25 inches (approx. 10.8 cm) (Note: Actual unit dimensions are likely smaller, often around 4.82 x 3.15 x 1.67 inches (12.2 x 8 x 4.2 cm), but shipping dimensions can vary significantly based on packaging.)
    • Weight (Approximate Package/Shipping): 4.7 – 4.8 Pounds (approx. 2.1 – 2.2 kg)
    • Mounting: Intended for below-decks mounting.
    • Environmental: Designed for the marine environment, though usually mounted in a protected area.

    Connections:

    • Input power connection (to vessel’s 12V/24V DC supply).
    • Output power and data connection (to the radar pedestal via the radar’s digital cable).

There are no reviews yet.

Be the first to review “Raymarine,VCM100 – Voltage Converter Module”

Your email address will not be published. Required fields are marked *

Download

Raymarine-Magnum-Open-Array-Radar-Install-instructions

Related Products

Click to chat directly
Hello
Can we help you?