The EV-100 Power Pilot is a complete autopilot solution for smaller powerboats with hydraulic steering. Ideal for boats with single-engine outboards, the EV-100 delivers precision autopilot control using the intelligent EV-1 sensor core and the ACU-100 actuator control unit. The system includes a .5 liter hydraulic autopilot pump. The pump is compatible with outboard hydraulic steering cylinder capacities between 50cc-110cc (3.1 in³–6.7 in³). EV-100 Power Pilot systems are available with a p70Rs autopilot control head, or choose a system without a control head and use a Raymarine Axiom chartplotter for complete autopilot control.

Key Features

Requires no complicated setup or autopilot calibration.
Includes the EV-1 sensor core. An intelligent 9-axis heading sensor that uses aerospace guidance technology to adapt and evolve to changing sea conditions and vessel dynamics
Exclusive Raymarine Hydro-Balance™ technology adjusts for elasticity in the hydraulic steering systems and compensates automatically to prevent steering oscillation. The result is precise course-keeping and no drive-unit hunting.
The EV-100 autopilot steers so accurately you will save fuel and get to your destination faster.

In the box

ACU unit
Documentation
Screws (pan head type)
SeaTalkng spur to bare wires cable 1 m (3.3 ft)

Technical Specification

Output
Drive current output	Maximum continuous 7 A at supply voltage

Physical
Dimensions	Width: 180 mm (7.1 in), Height: 140 mm (5.5 in), Depth: 52 mm (2.0 in)
Weight	0.6 kg (1.32 lbs)

Environmental
Relative humidity	Max. 93%
Waterproof rating	Connector panel: IPx2, Drive electronics: IPx6
Storage temperature	-30 °C to +70 °C (-22 °F to 158 °F)
Operating temperature	-20 °C to +55 °C (-4 °F to 131 °F)

Power
Power consumption (standby)	300 mA (12 V)
Nominal supply voltage	12 V dc
Operating voltage range	10.8 V dc to 15.6 V dc
LEN (NMEA 2000 Load Equivalency Number)	1