RJ45 Cat6 UTP PVC Patch Cord Ethernet Cables 20 meters

A Cat6 UTP PVC Patch Cord Ethernet Cable is a standard, flexible networking cable used for creating high-speed connections over short distances within a Local Area Network (LAN). The Category 6 (Cat6) designation means it’s certified to handle speeds up to $1 Gbps$ (Gigabit Ethernet) and provides a bandwidth of at least $250 MHz$ . It utilizes Unshielded Twisted Pair (UTP) construction, relying on its internal wire twists to minimize signal interference, and is jacketed with durable, flexible PVC (Polyvinyl Chloride) for general indoor use. Terminated with standard RJ45 male connectors on both ends, this cable is primarily used for “patching” devices like computers or switches to network outlets or to each other, and it is fully compliant with Power over Ethernet (PoE) standards.

Technical Specification

Specifications (Cat6 UTP Patch Cord)

Parameter	Specification	Detail
Cable Type	Cat6 UTP Patch Cord	Category 6, Unshielded Twisted Pair, flexible design.
Max Bandwidth	$250 MHz$ (Nominal)	The minimum frequency rating required for Cat6 performance.
Data Rate Support	$1 Gbps$ (Gigabit Ethernet)	Fully supports $10 Base-T$ , $100 Base-TX$ , and $1000 Base-T$ .
High-Speed Potential	$10 Gbps$	Capable of supporting $10 GBase-T$ over short distances (up to $\approx 55 meters$ ).
Conductor Type	Stranded Bare Copper	Provides necessary flexibility for a patch cord that may be moved frequently.
Wire Gauge	$24 AWG$ or $26 AWG$	Determines conductor thickness; $24 AWG$ is thicker and better for power.
Jacket Material	PVC (Polyvinyl Chloride)	Standard, general-purpose jacket for flexibility and indoor use.
Shielding	UTP (Unshielded Twisted Pair)	Relies on $4 twisted pairs$ of wires (8 conductors total) to cancel noise.
Connectors	RJ45 Male (8P8C) on both ends	Universal Ethernet connector, often with $50 μ m$ gold-plated contacts.
Wiring Standard	T568B (Commonly)	Standard straight-through configuration.
Features	Snagless Boot / Strain Relief	Protects the locking tab and reduces stress at the cable’s termination point.
Power Support	PoE/PoE+ Compliant	Supports Power over Ethernet (e.g., $IEEE 802.3 at/af$ ) for network devices.